![]() These are pin-out compatible (not software compatible) with the Senseair S8 CO2 sensorįor this purpose the air intake opening of the S8 sensor is also drawn in the silk screen to make it easier to add an opening in the PCB. ![]() The MH-Z19 and the MH-Z19B are quite affordable CO2 sensors. The larger 1.3" OLED monochrome displays use the SSH1106 chip. Available on Banggood Blue or White (affiliated links).Where I used his Fritzing parts, I left his credentials in the Fritzing parts. These display only every other line, so they remain compatible with the existing libraries for the 128圆4 displays. Some of his Fritzing parts, I made improvements on, but I also added some myself. The 0.91" displays are quite small and only show 32 pixels height. GND-VCC-SCL-SDA version available on Banggood (affiliate link).There are two versions of these displays, with only the GND and VCC swapped. NodeMCU V1.0: this is the second incarnation of the ESP8266 based dev board. ![]() Some of his Fritzing parts, I made improvements on, but I also added some myself. This repository started as a fork from Daniel Eichhorn (Squix78), the author of many fine projects like the OLED display library. Where applicable, both the breadboard and the silkscreen are designed. This repository contains parts for the Fritzing application.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |